Service, Accessories, Pactware 3.6 – Burkert Type 8791 User Manual
Page 60
60
Service
16.
serVice
If the positioner type 8791 is operated according to the instructions in this manual, it is maintenance-free.
17.
accessOries
CauTion!
risk of injury and/or damage by the use of incorrect parts!
Incorrect accessories and unsuitable replacement parts may cause injuries and damage the device and the sur-
rounding area.
• Use only original accessories and original replacement parts from Bürkert.
The order numbers of the attachment kits for linear or rotary actuators as well as for the matching cable
plugs of the multipole version of the positioner can be found in the data sheet for type 8791.
Designation
Order no.
M12 connection cable, 8-pole
919061
USB adapter with interface driver for connection to a PC in conjunction with
an extension cable
227093
Communications software based on FDT/DTM technology
Table 39:
Accessories
17.1. communications software (pc software based on
fDT/DTm technology
The communications software consists of the Bürkert DTM unit (configuration and parameterization software) and
an associated frame application, e.g. PACTware 3.6.
The DTMs can only run in conjunction with an FDT frame application such as PACTware.
The PC operating program is designed for communication with the units from the Bürkert positioner family (basic
models without display).
17.1.1. pacTware 3.6
The software belongs to the framework program of the PACTware Consortium e. V. for support and operation of
the FDT 1.2 or FDT 1.2.1 capable DTMs from any manufacturer.
microsoft .net framework 1.1 + .net framework 1.1 sp1 must be installed.
english
Type 8791