Burkert Type 8035 - Manual (Page 39)

39
Wiring
Type 8025/8035 /
flow sensor with a sinus output
Shielding of the sensor
cable
1 2 3 4 PE
NC
{
flow sensor with a pulse output (npn)
Shielding of the sensor
cable
V-
V+
Pulse, NPN
1 2 3 4 PE
NC
NC = not connected
Fig. 36: Wiring of the remote flow sensor to the 8025 transmitter
8.6. Wiring the 8025 remote (wall-mounted or panel), 12-36 V Dc, with or without
relays
8.6.1. Wiring the 8025, remote version, 12-36 V Dc, without relays
→
For a wall-mounted version, obey the wiring instructions of chap. "8.7.1".
→
Configure the FLOW SENSOR selector on the electronic board (see chap. "8.3").
→
Connect the flow sensor to the transmitter according to chap. "8.5".
English