Clear-Com Concert for Newsroom - Manual (Page 8)

8 Concert ActiveX Client for ENPS User Guide
1.3 Configuring the Concert Server address [ ]
You are asked to confirm/enter the address of the Concert Server during the installation of the
ActiveX Client. However, you must reconfigure the Concert Server if:

The Concert media server (IV_R) is at a different location than the Concert login server
(EMS).

The address of the Concert Server changes.
To configure the Concert Server on the ActiveX Client:
1. In the ENPS console, click the Rover icon [ ] located above Media Control [ ].
From the menu, select Open Concert.
2. The Concert login screen is displayed. Do either of the following:

Before you login, click the configuration icon [ ]. The Config > Server dialog
is displayed.

Log into Concert. Click the configuration icon [ ] in the side bar. In the
configuration dialog, select Server.
Note:
For more information about logging into Concert, see 2.1 Login.
3. If the login server is the same as the Concert media server, type the server name in the
Login Server field. Click Save.
If the login server is different than the Concert media server:
a. In the Login Server field, type the login server name. Click Advanced.
b. Select Specify a Media Server different than Login Server.
c. Type the name and port number of the media server in the fields provided.
Click Save.
4. To apply and save the configuration, click Apply and then Save.