Hach-Lange ORBISPHERE 3650 - Manual (Page 32)

30
Operating Information
4.3.3 Viewing stored measurements
To return to the measurement mode, switch the instrument OFF and then back ON again
without holding down any additional buttons.
4.4 Storing and accessing measurements from the PC
If you have made measurements and stored them in the instrument, you should be ready to
bring them into the WinLog97 program for viewing, copying, saving and printing. See also
Options Setup on page 35 for additional information on the WinLog97 program.
4.4.1 Downloading stored values
To download the stored results from the instrument to the PC, choose the DownLoad data
command from the Logger menu.
The DownLoad window presents a display of the stored measurements from the instrument.
The window displays five columns of data:
• Sample (sequence number of the sample)
• Gas (concentration of the measured gas)
• Date (date of the measurement)
• Time (time of the measurement)
• Sample Description
The descriptions can be modified for your applications using the procedures described below.
1. Switch the instrument OFF (by pressing
the POWER key)
2. Hold down the Up Arrow button while
switching the instrument back ON . The
LCD displays a sample location number.
3. Scroll through the numbered sample
locations of all the stored values using the
Up Arrow and Down Arrow buttons.
4. To view the actual gas concentration
measurement value at a particular sample
number, press the
STO button. The LCD
now displays the stored value for that
sample number.
5. Press STO a second time to return to the
next numbered location display, to
continue scrolling or view another stored
value.