Hach-Lange ORBISPHERE 3650 - Manual (Page 48)

46
Maintenance and Troubleshooting
7.2.3 Display test
Choosing Troubleshooting, Display Test lets you perform a one-way communication between
computer and instrument.
7.2.4 Clock settings
Choose the Clock settings command to set the date and time in the instrument.
The first screen displays the current date and time as set in the instrument. If this is correct,
choose Ok, else if either date or time must be changed, choose Modify to bring up the next
screen.
Enter the current date and time and choose Ok to store the entry into the instrument. All
measurements will be noted with the appropriate date and time when they are downloaded to
the WinLog97 program.
Type a number in the Number box (you may also
select one of three units positions for the LCD's
rightmost indicator bar as well). Then choose Send.
The number and indicator bar placement should
appear on your instrument LCD.