Hach-Lange ORBISPHERE 3650 - Manual (Page 37)

35
Section 5 Options Setup
The WinLog97 program is an integral part of the analyzer. Running under Microsoft Windows®,
it permits you to list and analyze up to 500 stored measurement values. The program also
includes a special monitoring feature, which lets your computer act as a chart recorder, and
enables a hardware test to ensure that the system is in good working order.
5.1 Main menu basics
When you start the program, it displays the Main Menu, which automatically maximizes on
opening and appears as follows:
Throughout the WinLog97 program menus, you will see shortcut keys (such as Ctrl+P, to print a
list of stored values). As you become familiar with the program, you may choose these
keystroke commands for faster operation.
File , shown below, serves typical Windows file management needs.
WinLog97 data files can be opened, saved under a different name, closed, or printed. You can
also exit the program.
The Logger menu appears as follows. Here you can download measurement values from the
instrument, make modifications to the sample list that can be used to identify sampling point
locations, or clear the instrument's stored values.
Export places your information into the Windows Clipboard, so that it can be pasted directly into
other Windows programs. This is especially useful when working with spreadsheet programs,
but the information can be pasted into word processing programs as well.
The Monitoring menu creates a running chart of real-time measurements (see Monitoring
measurements in real-time on page 32 ). These can also be saved to the Windows Clipboard.