Hach-Lange FILTRAX User Manual - Manual (Page 30)

28
Installation
Fig. 3-22 Connection of sample pressure tube
1. FILTRAX sample pressure tube 5. 4/6 tube
2. Sleeve 6. 2/4 tube
3. Quick-release connector 7. Small fitting
4. Large fitting
All the adapters necessary to the direct connection of the sample
pressure tube to the sample feed openings on the process instruments
are supplied in the tube adapter set LZX701 supplied.
If several instruments are supplied from one FILTRAX, the sample must
be provided from the first instrument to the next using the 2/4 tube to
ensure a short time delay.