2 every 3 months – Hach-Lange FILTRAX User Manual User Manual
Page 45
Advertising
Maintenance
43
6.1.1 Weekly
Visual inspection
•
General instrument function
•
Function of the venting on the filter modules
•
Quality of the filtered samples
•
State of the air filter in the control unit
6.1.2 Every 3 months
All maintenance work must
be performed in the [+SERVICE]
menu!
Replacement of consumables and cleaning
•
Replacement of the metering tubes
•
Replacement of control unit air filter
(depending on condition only air inlet)
•
Menu-based cleaning
(this cleaning interval can vary depending on the conditions)
Fig. 6-26
Consumables after 3 months
Fig. 6-27
Metering tube replacement
Advertising