Hach-Lange FILTRAX User Manual - Manual (Page 5)

3
Section 1 Technical data
Table 1-1 FILTRAX
Subject to change without notice.
Supply: 230 V (option 115 V) ±10% AC, 50-60 Hz
Power consumption:
Device with system components: 1500 VA
Cable Heater off
Max. (-20° C)
start-up
Cont. (-20° C)
2 m
10 m
20 m
30 m
150 VA
150 VA
150 VA
150 VA 450 VA
950 VA
1500 VA
2100 VA
< 200 VA
< 300 VA
< 400 VA
< 500 VA
Sample volume: approx. 900 ml/h for up to 3 process photometers
Head: Module carrier – control unit: 3 m ; control unit – process instrument: 7 m
Outputs:
(use screened cable!)
Fault signalling contact: floating contact (230 V, max. 3 A)
Warning contact: floating contact (230 V, max. 3 A)
Service interface: RS 232
Cable length:
Suction tube: 5 m (heated)
Sample tube: 2 m (unheated)
Sample tube: 10 m (heated), 20 m (heated), 30 m (heated)
User maintenance: approx. 1h / month
Medium temperature: +5° C to +40° C
Ambient temperature -20° C to +40° C
Enclosure rating: IP 55
Fuses:
T 4A E; 250V (2 ×)
T 7A E; 250V (2 ×)
Mass:
Control unit: approx. 22 kg
Module carrier with 5 m suction tube: approx. 9 kg
Sample tube 10 m:
approx. 5 kg
Sample tube 20 m: approx. 10 kg
Sample tube 30 m: approx. 15 kg
Mounting pipe 2 m: approx. 5 kg
Dimensions:
Control unit (W x H x D): 430 x 530 x 220 mm
Module carrier (W x H x D): 92 x 500 x 340 mm
Certification:
CE. The manufacturer clarifies conformity with the applicable EU safety guidelines
and EMC guidelines.