Hach-Lange DR2800 eco - Manual (Page 10)

10
Installation
3.3 Power connections
Install the correct adapter plug on the supplied external power
supply (
Figure 1 ) by sliding the adapter on until it "clicks" into
position. Correctly mounted, both housing of power supply and plug
are in line. Plug the external power supply cord into the connector
on the back panel of the instrument, then plug the supply into a
power outlet (100–240 V~ / 50–60 Hz). Press the power switch on
the back of the instrument to initialize power
(
Figure 2 on page 11 ).
Figure 1 Power adapter
1 Power supply with EU adapter plug installed 3 USA adapter plug
2 UK adapter plug 4 AUS/China adapter plug