Hach-Lange BUHLER 1027 2000 - Manual (Page 33)

Operation
Page 33 Manual Bühler 2000
Program end
After having defined the start conditions, the program
end can be set as follows:
- AFTER 1 RUN
Program is terminated after 1 run
- AFTER X RUNS
Program is terminated after X runs
- CONTINUOUS OPERATION
Program is continued indefinitely
Display of PROGRAM STATUS/STOP
Shows Status of programs. Programs can be paused or
stopped.
The status of all programs can be checked by pressing
the arrow keys (right/left).
When pressing the Enter key, the following is displayed:
ACTIVE = Program is started
or
INACTIVE = Program is not started