Hach-Lange BUHLER 1027 2000 - Manual (Page 58)

Operation
Page 58 Manual Bühler 1027
Navigation
The sampler can be operated by means of the control
unit. With the ARROW KEYS, the ENTER KEY and the
BACK KEY you can move from one screen to another.
An arrow on the display shows that there are further
selection possibilities (see illustration).
Example:
3.
Press the “DOWN” arrow key two times to select the line DATA MEMORY.
4.
Now press the ENTER KEY to display the data memory or to choose another
selection possibility.
Remark: T he arrow pointing downward on the right side (bottom) of the display indicates that
there are further selection possibilities .
Menu variants:
The top line indicates that you can navigate to the right
or to the left by pressing the arrow keys.
The bottom line indicates with which key the action is
executed or terminated.
Here you can set a parameter. The top line shows
which value is to be set. The bottom line indicates the
possible range of values. The entry is possible directly
by means of the number keys or the digit is selected
with the right / left arrow keys and changed with the up
/ down arrow keys. The selected digit is displayed
inversely (cursor). Confirm the entry by pressing the
ENT key or abort it by pressing the BACK key (in this
case the initial value is not changed).
The arrows show that a digit can be changed.