Operation, Main menu overview, Configure the system settings – Hach-Lange SD900 Refrigerated Sampler, SD900 AWRS User Manual User Manual
Page 19: Main menu overview configure the system settings, Figure 12, Use the menu key to set up sampling programs
Figure 12 Controller keypad
1 POWER
5 MENU
9 STATUS
2 VOLUME CALIBRATION
6 ENTER
10 RUN/HALT PROGRAM
3 STOP
7 BACK
11 MANUAL OPERATION
4 LED
8 ARROW KEYS
Operation
Main menu overview
The main menu contains four options for sampler operation, monitoring or data management.
Table 1 SD900 sampler menu overview
Menu option
Description
Program setup
Create, review or set up a sampling program
Status
Display the status of the current program
Diagnostics
Review and manage data or test the operation of
components
System setup
Change the controller settings or calibrate the liquid
sensor
Configure the system settings
1. Push MENU.
2. Go to SYSTEM SETUP.
3. Change the applicable options.
Option
Description
Time/date setup
Set the time (24-hour format) and date.
Communication
Select the baud rate (19200, 38400, 57600 or 115200) and protocol (Modbus
RTU or ASCII) for the serial port.
English 17