2 routine operation, 1 thermometer symbol – Hach-Lange LT 200 Thermostat User Manual
Page 62
Advertising
61
Start up
5.2 Routine operation
•
Prepare the cuvettes as described in the
working procedure.
•
Switch on the thermostat and open the
protective lid.
•
Place the cuvettes in a heating block and
close the protective lid.
1.
Select the required temperature program
using the appropriate keys.
•
The thermostat heats to the set temperature
and the time automatically counts down to
zero.
•
The actual temperature and the remaining
time are permanently visible in the display.
•
Three beeps indicate that the temperature
program is finished; the thermostat cools.
5.2.1 Thermometer symbol
Thermometer
symbol
Description
Heating block is heating.
Heating block has reached
the set temperature.
Heating block is cooling.
Advertising