Hach-Lange LT 200 Thermostat - Manual (Page 63)

62
Start up
5.2.2 Clock symbol
5.2.3 Beep functions
5.2.4 Stop function
The stop function can be used to terminate a
temperature program at any time.
1. Select the program you want to stop.
2. Terminate the temperature program with
STOP .
Note: Press the UP ARROW KEY to allow the
temperature program to proceed without being
terminated.
Clock symbol Description
The remaining time counts
down to zero.
Beep function Description
1 beep
Thermostat is ready for
operation after
initialization.
2 beeps
Set temperature has been
reached.
3 beeps
End of temperature
program.
4 beeps
COD program - cooling
phase 80 °C - remove
cuvettes and invert a few
times.