Jungheinrich AMX_10-10e - Manual (Page 3)

1) 680 mm also possible
2) Electric and manual lift
3) Lateral support rollers
4) On-board charger
In accordance with VDI Guideline 2198 this specification sheet provides details of the standard truck only. Non-standard tyres, different masts, optional equipment, etc. may
result in different values.
Technical data in line with VDI 2198
Issue: 11/2012
Identifica
tion
1.1 Manufacturer (short form) Jungheinrich
1.2 Model AMX 10 AMX 10e
1.3 Drive manual Electrics
1.4 Manual, pedestrian, stand-on, seated, order picker operation hand hand 2)
1.5 Load capacity/rated load Q t 1
1.6 Load centre distance c mm 600
1.8 Load distance x mm 1030
1.9 Wheelbase y mm 1383
W
eights
2.1 Service weight kg 157 195
2.2 Axle load, w. load, front / rear kg 406 / 751 443 / 752
2.3 Axle load, w.o. load, front / rear kg 101 / 56 136 / 59
Wheels / chassis
3.1 Tyres N;C;V
3.2 Tyre size, at front mm Ø 170 x 50
3.3 Tyre size, at rear mm Ø 82 x 62
3.4 Additional wheels (dimensions) mm Ø 82 x 62 3)
3.5 Wheels, number front/rear (× = driven wheels) 2/2
3.6 Track width, front b
10
mm 109
3.7 Track width, rear b
11
mm 440
Basic dimensions
4.4 Lift h
3
mm 714
4.5 Extended mast height h
4
mm 1897
4.9 Height of tiller in drive position min. / max. h
14
mm 1299
4.15 Lowered height h
13
mm 86
4.19 Overall length l
1
mm 1650
4.20 Length incl. back of forks l
2
mm 500
4.21 Total width b
1
/b
2
mm 560
4.22 Fork dimensions s/e/l mm 53 / 150 / 1150
4.25 Width over forks b
5
mm 560 1)
4.32 Floor clearance centre wheelbase m
2
mm 30
4.34 Aisle width for pallets 800 × 1200 lengthways Ast mm 2005
4.35 Turning radius W
a
mm 1635
Perform
-
ance da
ta 5.2 Lift speed, w. / w.o. load m/s 0.03 / 0.05
5.3 Lower speed, w. / w.o. load m/s 0.11 / 0.04 0.13 / 0.05
Electrics
6.2 Lift motor rating at S3 15% kW 0.5
6.3 Battery according to DIN 43531/35/36 A,B,C, no maintenance-free 4)
6.4 Battery voltage/nominal capacity K5 V/Ah 12 / 70
6.5 Battery weight kg 24