Kolpin 86400 – UTV 72” Snow Plow - Manual (Page 4)

4
Step #3 Continued
3. Insert #23 Blade Height Frame between above secured plates and mounting brackets at this time
4. Secure hardware but do not tighten at this time.
Step #4
1. Locate Main Blade Assembly #48 and Cutting Edge #51.
2. Locate (11) each of the #52, 53, 54 hardware.
3. Secure Cutting Edge #51 to Main Blade Assembly with hardware.
4. Tighten all hardware at this point.
Step #5
1. Locate Blade Pivot Assembly #36 and Hardware #37, 38, 39, 40.
2. Secure #37 using hardware #38, 39, 40 to upper holes located on #36 as shown in picture below.
Step #6
1. Locate #26 Main Blade Support Frame and hardware #45, 46, 47.
2. Secure #36 assembly from Step #5 to #26 Main Blade Support frame using hardware listed above.