Kolpin 10-0520 X-Factor Plow - Manual (Page 8)

8
© 2011 Kolpin Outdoors Inc.
NOTICE
For ease of assembly, loosely install all fasteners.
Torque all fasteners to specification after all remaining
blade components have been assembled.
BEFORE YOU BEGIN:
• Please read and understand all instructions.
• Verify all parts and tools are accounted for.
• To ensure a satisfactory installation, follow all steps
correctly and in the sequence described.
• All directions referring to right and left are when the
rider is sitting on the machine
INSTALLATION NOTES:
TOOLS REQUIRED:
• Basic Hand Wrench and Socket Set
• Torque Wrench
• Plastic Cutting Tool
NOTICE
Depending on application, some trimming of plastic guards
or panels may be required to install the Forward Mount.
NOTICE
Refer to Installation Steps A, B, C or D of the Forward
Mount installation manual, depending on your application.
NOTICE
Blade hinge parts must pivot - See Illustration and notes
Initial spring
tension setting:
With spring
attached to blade
hinge, thread
locknut onto the
eyebolt until
spring coils begin
to open slightly
Loosen nut
approximately 1/8-1/4
turn after tightening