Kolpin WHS03HD ATV User Manual
Page 4
4
1.Locate #7
Short Tow Bar For ATV /
Long Bar For UTV and #13 Single Cross Arm.
2.Locate #1
Ш16Ч100 Pin
, #3
R Pin
, #6
Lock Nut M16
, #17
Flat Washer Ø16
, #16
Hex Bolt M16X90
At this time determine the size of the hitch assembly you would like to install.
3.
Place #17
Flat Washer Ø16
between #7
Short Tow Bar For ATV /
Long Bar For UTV and #13 Single Cross
Arm.insert #16
Hex Bolt M16X90
with #6
Lock Nut M16.
4.Secure #1 Ш16Ч100 Pin to #7 Short Tow Bar For ATV /
Long Bar For UTV
with #3 R Pin.
1.Locate #10
Link C Seam
, #13 Single Cross Arm, #15
Link B Seam
2.Locate #11
In-Hex Cylinder Shoulder Screw B
, #12
Lock Nut M12,
#3
R Pin
, #5
Pin B
, #14
In-Hex Cylinder
Shoulder Screw A
.
3.Secure #10
Link C Seam
to the left bottom of #13 Single Cross Arm with #11
In-Hex Cylinder Shoulder
Screw B
and #12.Then secure #15
Link B Seam
to the right bottom of #13 Single Cross Arm with #3
R Pin
,
#5
Pin B
, #14
In-Hex Cylinder Shoulder Screw A
, #12
Lock Nut M12