Kolpin 85145 – Honda Rancher AT 2 Receiver Hitch - Manual (Page 2)

Rev. 1
4. Tighten 10mm Bolts securely, using the (2) 10mm Lock Nuts provided.
5. Insert the ¾” Washer and Nylon Nut onto the ¾” Threaded Stud, and tighten
securely!
6. Place Bent Hitch Pin through Hitch Tube and secure by clipping the R-Clip
through the hole on the bent hitch pin.
Hitch Use:
The 2” Receiver hitch is designed to allow you to quickly and easily mount and
dismount the DirtWorks 3-Point Hitch system.
Kolpin recommends the use of the DirtWorks Suspension Lock with the use of
the DirtWorks system.
The hitch can also be used for chores around the house, such as moving your
boats, trailers, etc.
Hitch Compatible With:
1. Honda Rancher AT
Kolpin Outdoors, Inc.
205 N. Depot St, Fox Lake, WI 53933
Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com
[email protected]