Kolpin 53570 - Stealth Exhaust 2.0 & Heat Shield - Manual (Page 10)

Rev. 1
POLARIS RZR (2008 Model Year) INSTALLATION
Remove the existing hex bolt from the OEM
muffler as shown.
Grind the access material sticking up inside the
tailpipe from where the existing bolt was threaded.
This allows the Kolpin Muffler to slide in easily.
Next, drill back through the stealth and
replace the self tapping OEM Bolt to secure
the Stealth.
Now, place the 25mm and 28mm “R” strap around the frame
tube. Attach the Mounting Strap to “R” Straps. Note: Straps
will have to be bent to fit as shown. Bolt using the hardware
provided.
Kolpin Powersports, Inc.
205 N. Depot Street, Fox Lake, WI 53933
Tel. : 877-9KOLPIN or 920-928-3118
www.kolpinpowersports.com [email protected]
Final look using the Kolpin Stealth Exhaust with Heatshield.