Enjoy your new lights – Kolpin 97950 – HID Lights User Manual
Page 3
Rev.1
Kolpin Outdoors, Inc., 205 N. Depot Street, Fox Lake, WI Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com
triangle plug. You only need to plug in one side, and it is usually within 12” of
wire back from the stock headlight.
-
Plug ballast plugs into ballast, taking care to plug in with correct polarity. They
should only go in correctly with a ramped clip retainer on one side, but they can be
forced incorrectly.
-
Attach the Red to the positive on the battery and the Black to the battery or any
good ground on the chassis.
- Connect the hi/lo control wires to the bulbs. Each bulb should have a
small
plug with 2 wires in it. Connect the bulbs to the plugs in the wire harness that match.
Each bulb should have 3 connections; positive, negative, and hi/lo control.
-
Secure everything with zip ties and make sure ballast are securely mounted.
Enjoy your new lights!!