Enjoy your new lights – Kolpin 97945 – HID Lights User Manual
Page 2
Rev.1
Kolpin Outdoors, Inc., 205 N. Depot Street, Fox Lake, WI Phone #: (877) 9KOLPIN or (920) 928-3118
www.kolpin.com
- Plug ballast plugs into ballast, taking care to plug in with correct polarity. They should
only go in correctly with a ramped clip retainer on one side, but they can be forced
incorrectly.
- Attach the Red to the positive on the battery and the Black to the battery or any good
ground on the chassis.
- Connect the hi/lo control wires to the bulbs. Each bulb should have a small plug with 2
wires in it. Connect the bulbs to the plugs in the wire harness that match. Each bulb
should have 3 connection, positive, negative and hi/lo control.
- Secure everything with zip ties and make sure ballast are securely mounted.
Enjoy your new lights!!