Kolpin 21515 - Rhino Grip XL – Double User Manual

Kolpin Hardware

Advertising
background image

Rev. 02

21515 - Rhino Grip XL – Double

M

M

M

Mounting Instructions

ounting Instructions

ounting Instructions

ounting Instructions -

-

-

-

1. Position the Rhino Grip mounting base on the rack of the ATV where desired.

2. Run the ¼” bolts provided through the main base and through the metal backer plate. Secure with nylon

nuts. Repeat three more times.

3. Tighten the (4) truss head bolts evenly. Note: Be sure not to over tighten the bolts, as too much torque

can over stress the base and cause the grip to fail.

4. Place the connector into the doubler plate.

No.

Description

QTY.

Spare P/N

1

Plastic Mounting Base

2

2

Doubler Plate

2

71503

3

Connector

2

4

Metal Backer Plate

2

71513

5

Rhino Grip

4

71511

6

Adjustment Knob

4

71501

7

Kwik Clip - Small

4

No.

Description

QTY.

Spare P/N

8

Kwik Clip - Large

2

9

Rubber Strap

4

87010

10

¼” – 20 x 1.50” Truss Bolt

8

11

¼” – 20 Nylon Nut

8

12

Kolpin Logo

6

13

M6 – Black Nylon Nut

2

14

M6 Flat Head Machine Screw

2

5

2

8

1

These grips are designed to

quickly and easily mount to the

rear rack of an ATV. Note:

Hardware provided is based on

the biggest tube diameter. You

are required to cut the excess

threads from the grip once

installed. Failure to do so may

result in damage to your

machine.

To tilt the grip simply

loosen the adjustment

knob, tilt the grip to

the angle of your

choice, and retighten.

9

3

2

Advertising