5 five-digit entry code programming, 6 delete five-digit entry codes, 7 delete all five-digit entry codes – DoorKing 1803 Entry System User Manual

Page 36: 8 five-digit entry code divide number

Advertising
background image

3.3.5

Five-Digit Entry Code Programming

This programming sequence programs five-digit entry codes into the system memory. The number of
five digit entry codes that can be programmed is limited to six. We suggest that all entry codes that
are programmed into the system be listed with the names of persons that they have been assigned to
(see appendix).

1.

Press *09 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2.

Enter the five-digit entry code _ _ _ _ _ then press * (beep).

3.

Repeat step 2 to enter additional entry codes.

4.

Press 0# TOGETHER to end this programming step (beeeeeep).

3.3.6

Delete Five-Digit Entry Codes

1.

Press *10 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2.

Enter the five-digit entry code _ _ _ _ _ then press * (beep).

3.

Repeat step 2 to delete more entry codes.

4.

Press 0# TOGETHER to end this programming step (beeeeeep).

3.3.7

Delete All Five-Digit Entry Codes

This programming sequence deletes all five-digit entry codes that have been programmed into
the system. CAUTION: this programming step is irreversible once it is started
.

1.

Press *11 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2.

Press 9999 then press * (beep). This programming sequence will automatically end
itself. This will be indicated by a long tone (beeeeeep).

3.3.8

Five-Digit Entry Code Divide Number

The five-digit entry codes can be made to activate either relay 1 or relay 2 by programming a five-digit
divide number. Five-digit entry codes equal to or less than the divide number will activate relay 1.
Five-digit entry codes greater than the divide number will activate relay 2. HINT: you can make all
five-digit entry codes (except 00000) activate relay 2 by programming divide number 00000, or make
all five-digit entry codes activate relay 1 by programming divide number 99999.

1.

Press *13 and enter the four-digit MASTER CODE _ _ _ _ (beep).

2.

Enter the five-digit divide number _ _ _ _ _ then press * (beep).

3.

Press 0# TOGETHER to end this programming step (beeeeeep).

Page 36

1800-060-R-8-11

Advertising
This manual is related to the following products: