Laurel Electronics LAUREATE SERIES Serial Comunications - Manual (Page 25)

-24 -
2C Alarm Cnfg2 Bit 7 6 5 4 3 2 1 0 Alarm Trigger Delay
60 Hz 50Hz
0 0 0 .018s .021s
0 0 1 .035 .043
0 1 0 .07 .085
0 1 1 .14 .17
1 0 0 .28 .34
1 0 1 .56 .68
1 1 0 1.13 1.36
1 1 1 2.27 2.72
0 0 0 AL1 Band Dev, AL2 Band Dev
0 0 1 AL1 Hysteres, AL2 Band Dev
0 1 0 AL1 Band Dev, AL2 Hysteresys
0 1 1 AL1 Hysteresys, AL2 Hysteresys
1 0 0 No deviatn in menu or calc
2B Alarm Cnfg1 Bit 7 6 5 4 3 2 1 0
0 0 0 0
AL1 hi activ, AL2 hi activ
0 0 0 1 AL1 lo activ, AL2 hi activ
0 0 1 0 AL1 disabled, AL2 hi activ
0 1 0 0 AL1 hi activ, AL2 lo activ
0 1 0 1 AL1 lo activ, AL2 lo activ
0 1 1 0 AL1 disabled, AL2 lo activ
1 0 0 0 AL1 hi activ, AL2 disabled
1 0 0 1 AL1 lo activ, AL2 disabled
1 0 1 0 AL1 disabled, AL2 disabled
0 0 AL1 non-latch, AL2 non-latch
0 1 AL1 latch, AL2 non-latch
1 0 AL1 non-latch, AL2 latch
1 1 AL1 latch, AL2 latch
0 0 Relay 1 ON, Relay 2 ON
0 1 Relay 1 OFF, Relay 2 ON
1 0 Relay 1 ON, Relay 2 OFF
1 1 Relay 1 OFF, Relay 2 OFF
3-BYTE RAM MEMORY DATA
All items except Scale Factor use this format:
Note: Hex value (2's complement) MS byte Mid byte LS byte
X X X X X X
Scale factor uses this format: MS byte Mid byte LS byte
MS Nibble
*
(Polarity and Decimal Point)
*
X X X X X
Positive 1 Negative 9 (Decimal point XXXXX.)
2 A (Decimal point XXXX.X)
3 B (Decimal point XXX.XX)
4 C (Decimal point XX.XXX)
5 D (Decimal point X.XXXX)
Note: Hex value (Absolute value) 6 E (Decimal point .XXXXX)