Magnum Venus Plastech UltraMAX UPLS-2300_UPLS-2300-SS - Manual (Page 21)

MAINTAINENCE AND REPAIR MANUAL
UPLS-2400-SS/2300-SS
MAGNUM VENUS PLASTECH REV 1.13
APRIL 2010 PAGE 21
PISTON ROD DISASSEMBLY
PISTON ROD DISASSEMBLY UPLS-2300-SS ONLY
The UPLS-2300-SS Piston Body has an additional O-ring seal near the ball seat. During disassembly of
the Piston Rod Assembly, DO NOT REMOVE THIS O-RING! The O-ring is not in the –SK or –RK kits
and must be ordered separately.
Wipe down the Piston Body with the approved solvent and inspect the O-ring. Under normal conditions
this O-ring will not have to be replaced. If the O-ring is nicked, torn or broken, it must be replaced. (FIG
3.80)
FIG 3.80