Magnum Venus Plastech UltraMAX UPLS-2300_UPLS-2300-SS - Manual (Page 34)

MAINTAINENCE AND REPAIR MANUAL
UPLS-2400-SS/2300-SS
MAGNUM VENUS PLASTECH REV 1.13
APRIL 2010 PAGE 34
PISTON BODY ASSEMBLY
Depending on how the unit was configured from the factory, there are 2 distinct seal designs that are
used. The Barrel seal (FIG 5.50), or the Cup seal. (FIG 5.52)
-SS VERSION ONLY!
If the Kalrez O-ring (O-K-013) has been removed from the Piston Body, insert replacement back into the
groove in the seat area making sure it is seated properly. (FIG 5.4)
FIG 5.4