Magnum Venus Plastech UltraMAX UPLS-2300_UPLS-2300-SS - Manual (Page 43)

MAINTAINENCE AND REPAIR MANUAL
UPLS-2400-SS/2300-SS
MAGNUM VENUS PLASTECH REV 1.13
APRIL 2010 PAGE 43
CYLINDER INSTALLATON
Before installing the Cylinder Tie Rods, place a small amount of lubricant on the threads that will go into
the Outlet Body. Install the Cylinder Tie Rods and tighten with a wrench. (FIG 6.30)
FIG 6.30
Place the O-rings on the Cylinder Tube and lightly coat them with approved lubricant. (FIG 6.31)
FIG 6.31
Slide the Cylinder Tube over the Piston Rod assembly until the top of the Cylinder Tube bottoms out on
the Outlet Body. FIG (6.32)
FIG 6.32