Magnum Venus Plastech Pro Series VPRO-45220 22:1 & 7:1 - Manual (Page 17)

VPRO-45220 Series Resin Pump Manual
Rev. 11/2013 Page | 17
Requirements:
Air Requirements:
Clean, dry compressed air must be available at up to 90 psi (6.3 kg/cm 2 ) and a minimum volume
of 10 CFM (0.3 m 3 ). Air must be provided through an air hose with a diameter of 0.5 inch (1.3
cm) or greater.
Tool and Supplies Requirements:
When performing service and repair on the Pro Pump, you should have the following tools,
spare parts and supplies available before beginning.
NOTE: Items followed by a * may be purchased from Magnum Venus Plastech.
 One table vise
 Loctite™ 243 (removable) or equivalent thread lock compound
 One small hammer
 Needle-nose pliers
 Solvent or emulsifier for cleaning
 One clean work table
 Anti-seize thread sealant
 Set of hex wrenches * (08469)
 One 5/8-inch wrench * (08474)
 One 9/16-inch wrench * (08476)
 One 5/16-inch wrench * (08477)
 Empty buckets for cleaning
 Clean ¼-inch plastic dowel or rod
 One 8-inch adjustable wrench * (08467)
 One 12-inch adjustable wrench * (08468)
 One 7/16-inch open-end wrench
 One ½-inch socket wrench
 One 7/16-inch socket wrench * (08472)
 Wooden sticks or tongue depressors (for testing)