Magnum Venus Plastech Pro Series VPRO-45220 22:1 & 7:1 - Manual (Page 18)

VPRO-45220 Series Resin Pump Manual
Rev. 11/2013 Page | 18
 Labels and pens (for marking pneumatic lines)
 Clean rags and paint brushes for cleaning equipment
 One tube of medium-weight lithium grease (such as Lubriplate ® lubricant * (08465))
 Large (approximately 3 feet by 10 feet or 1 meter by 3 meters) strips of paper for
performing spray tests.
 One pin wrench * (45031-1) (comes with catalyst jug)
 One scribe * (08126)
 Red Grease * (6706-2-1)
 Seal Kit *
VPRO-45220-SK Seal Kit - Gel Coat Pump
VPRO-25700-SK Seal Kit – 7:1 Pump Assembly
NOTE: Lubriplate® is a registered trademark of the Lubriplate division of Fiske Brothers
Refining Company.
NOTE: Loctite™ is a trademark of the Loctite Corporation.
NOTE: Teflon® is a registered trademark of E.I. DuPont de Nemours and Co.
IMPORTANT WARRANTY INFORMATION
Please note that components used on this equipment are made of specially developed, high-
strength material.
 Only authentic Magnum Venus Plastech replacement parts are acceptable for
use with this equipment.
 Use of unacceptable replacement parts will void our liability and warranty of this
equipment.
Please contact your Magnum Venus Plastech distributor for more information.