Magnum Venus Plastech SUPER PRO GUN II - Manual (Page 19)

SUPER PRO GUN &
SUPER PRO GUN II
Chapter
4
SUPER PRO GUN
SuperCutter Assembly
5101-01-01
NOTE
The sharp edge of the Chopper Blades should be slightly dulled by stropping
them on cardboard prior to installation into Rotor Assembly. This intentional
dulling of the blades by the whetting process will avoid slicing and nicking of
the Rubber Roll and will assure longer life of both Blades and Rubber Roll.
See Fig. 4.1.
Fig. 4.1
14
See Figs. 9.13 - 9.20 for exploded schematic drawings