Magnum Venus Plastech SUPER PRO GUN II - Manual (Page 30)

SUPER PRO GUN &
SUPER PRO GUN II
Rotor Disassembly
4. Loosen the two 7102-14-6 (Socket Cup Point Set Screws), and
slide the 5103-03-01 (8-Blade Rotor Assembly) off of the 8402-1-1
(Air Motor) shaft.
5. Loosen the 7102-13-6 (Socket Flat Head Screws) used to secure
the 5103-29-1 (Wedge Inserts), and remove the 9210-1-1
(Chopper Blades) from the 5103-03-01 8-Blade Wedge Rotor
Assembly)
NOTE
Be very careful when handling the Rotor Assembly as the blades are sharp and
could cause injury.
25