Magnum Venus Plastech SUPER PRO GUN II - Manual (Page 6)

SUPER PRO GUN &
SUPER PRO GUN II
SUPER PRO GUN
Actuator Assembly
5106-01-01
1. Install the 7301-3-020 (O-Ring) onto the 5106-7-1 (Actuator
Piston) and the two 5106-4-1 (Cylinder Caps)
2. Using 6706-3-1 (Pro Gun Oil), lightly coat the Inside of the
5106-1-01 (Cylinder Body) and the 5106-7-1 (Actuator Piston).
3. Install the 5106-5-1 (Actuator Bushing) into the 5106-7-1 (Actuator
Piston).
4. Push the 5106-7-1 (Actuator Piston) into the 5106-1-01 (Cylinder
Body) through the long end. See Fig. 1.1
1
Chapter
1
Fig. 1.1
See Figs. 9.1 & 9.2 for exploded schematic drawings