Super pro gun handle disassembly – Magnum Venus Plastech SUPER PRO GUN II User Manual
Page 25
SUPER PRO GUN &
SUPER PRO GUN II
20
Chapter
6
SUPER PRO GUN
Handle Disassembly
5105-00-01
1.
Remove and discard the 5105-7-1 (Cylinder Gasket), and the
5105-6-1(Toggle Washer) from the 5105-5-1 (Porting Plate).
2.
Remove the 5105-5-1 (Porting Plate) from the 5105-1-1 (Gun
Handle).
3.
Remove the 5105-4-1 (Porting Plate Gasket),
5105-3-1 (Slide Valve), and the 9203-2-1 (Compression Spring)
from the 5105-1-1 (Gun Handle). Discard the Porting Plate Gasket
and Compression Spring.
4.
Remove the two 7102-8-8 (Slotted Pan HD Mach Screws) to
remove the 5105-2-1 (Trigger Guard).
5.
Remove 7102-10-12 (Slotted Flat Head Screw), and slide the
5105-16-01 (Trigger Assembly) out from under the 5105-14-1
(Trigger Stem).
6.
Remove the 5105-10-1 (Trigger Nut) from the 5105-1-1 (Gun
Handle).
See Figs. 9.3 & 9.4 for exploded schematic drawings