Luminex 200 System User Manual - Manual (Page 18)

Mechanical
WARNING: During operation, this system contains exposed, moving parts.
Risk of personal injury is present. Observe all warnings and
cautions.
WARNING: During operation, this system contains exposed, moving parts
which could result in puncture hazard. Risk of personal injury is
present. Keep hands and fingers away from the Luminex XYP
instrument slot during operation
WARNING: During operation, this system contains exposed, moving parts
which could result in pinch point hazard. Risk of personal injury
is present. Keep hands and fingers away from the Luminex XYP
instrument slot during operation.
Access doors must be closed while operating the Luminex 200 analyzer; the operator must
be present during operation.
Biological
WARNING: Human and animal samples may contain biohazardous
infectious agents.
Where exposure (including aerosol) to potentially biohazardous
material exists, follow appropriate biosafety procedures and use
personal protective equipment, such as gloves, gowns,
laboratory coats, face shields, or mask and eye protection, and
ventilation devices.
Observe all local, state, and federal biohazard handling
regulations when disposing of biohazardous waste material.
Heat
WARNING: The heater plate of the Luminex XYP instrument may be hot
and could cause personal injury if touched.
WARNING: Do not touch the heater plate.
Blue Indicator Light
The blue light above the Luminex 200 analyzer sample arm indicates the on/off status of the
Luminex 200 analyzer, and is harmless. The blue light-emitting diode (LED) does not emit
light in the UV spectrum.
Luminex ® 200 ™ System User Manual
6
For In Vitro Diagnostic Use