Luminex 200 System User Manual - Manual (Page 38)

3. Grasp the tubing and pull the filter 3 to 4 inches from the unit. See the following figure.
FIGURE 6. Grasping the Tubing
4. Remove the filter with one hand, and hold the tubing with the other hand.
5. Connect a new filter to the tubing and position the filter inside the panel.
6. Reattach the panel door to the unit.
7. Plug in and power on the Luminex 200 analyzer.
Luminex ® 200 ™ System User Manual
26
For In Vitro Diagnostic Use