Luminex 200 System User Manual - Manual (Page 22)

through the Luminex 200 analyzer. Results of the analyses are processed and provided in a
report format.
Hardware
The Luminex 200 system includes the following hardware:
• Luminex 200 analyzer
• Luminex XYP instrument
• Luminex Sheath Delivery System (Luminex SD ™ )
• Power cables
• Two long sample probes
• Reservoir
• Shield
• Heater block
• Sheath fluid container
• Waste container
• Sheath fluid line
• Air line
• Sheath fluid intake line
• Communications: 1 serial communication cable
• Communications: 1 USB communication cable
• Communications: 1 CANBUS cable (short cable)
• Barcode reader
• Sample probe height alignment kit
xMAP Technology Reagents
IS 2.3
• Classification calibration microspheres (CAL1)
• Reporter calibration microspheres (CAL2)
• Classification control microspheres (CON1)
• Reporter control microspheres (CON2)
• Luminex xMAP Sheath Fluid
xPONENT 3.1
• Calibration Kit (CAL)
• Verification Kit (VER)
• Luminex xMAP Sheath Fluid
Luminex ® 200 ™ System User Manual
10
For In Vitro Diagnostic Use