Minuteman E24 (7061.31) Walk-Behind Scrubber - Manual (Page 16)

16
Display (Fig. 4/1)
This panel allows centralized monitoring of
functions and detection of all available
operating modes.
The key switch turns the electrical system
on and off.
Battery charge indication (Fig. 4/3)
Battery charge indication appears on
the panel during the charging procedu-
re and shows the current charge condi-
tion of batteries during the procedure.
The following symbols appear:
Battery symbol A < charge of 20 %
Battery symbol B = charge of 80 %
Battery symbol C = charge of 100 %
Battery symbol D (flashes) = error
LDS indicator (Fig. 4/4)
Upon switching on, the LDS indication is
output on the panel to show the current
battery charge condition during operation.
Additional Information see chapter
maintenance.
Symbol brush drive (Fig. 4/5)
This symbol appears when brush drive is
switched on.
Symbol vacuum motor (Fig. 4/ 6)
This symbol appears when vacuum motor
is switched on.
Hourmeter (Fig. 4/7)
Upon switching on, the hourmeter briefly
displays the software version and the last
error code. Then the current operating hour
level is shown.
Service indicator (Fig. 4/8)
The service indicator lights after a system
error or when cleaning or transporting
procedure is interrupted. In addition to the
service indicator, a 4-digit code is displayed
on the hourmeter.
Remove the key to avoid un-
authorized use of the machine.
A B C D
1.1.1.1
S i
Operation