Minuteman E24 (7061.31) Walk-Behind Scrubber - Manual (Page 17)

17
free (Fig. 4/9)
Silence Kit tip symbol (optional)
(Fig. 4/10)
This symbol appears when Silence Kit tip-
switch is switched on.
Solution flow symbol (Fig. 4/11)
This symbol appears upon actuation of the
solution flow tip-switch.
Silence Kit tip-switch (optional)
(Fig. 4/12)
This tip-switch is used to change the
vacuum motor to silent mode. The silent
mode symbol appears in the display.
Solution flow tip-switch (Fig. 4/ 13)
This tip-switch is used to regulate the
amount of solution. Additionally, solution
amount is adapted to driving speed. The
display shows a six-stage symbol for the
supplied amount of solution.
Solution supply ON/OFF tip-switch
(Fig. 4/14)
This tip-switch is used to switch solution
supply ON or OFF.
Scrubbing tool symbol (optional)
(Fig. 4/15)
This symbol appears when scrubbing tool-
switch (A) is switched on
Hand cleaning tool (optional)
Hand-cleaning tool with spray function for
the E 24 with scrubbing tool connection for
thorough cleaning on areas which are
difficult to reach.
Drive direction control with speed
control knob/bail handle (Fig. 4/16)
The drive direction control (16a) is used to
control the driving direction (forward or
reverse). The bail handle (16c) must be
pressed in order to drive. The speed can
be adjusted continuously by means of the
speed control knob (16b). The machine
stops when the bail handle is released
(deadman function).
Secure the machine from moving
before leaving it unattended.
Operation
A