Minuteman E24 (7061.31) Walk-Behind Scrubber - Manual (Page 36)

36
Maintenance and Care
5.8 Cylindrical Brush Deck
1 Brush deck lift pedal
2 Dirt hopper
3 Cylindrical brush deck
4 Roller bumpers
5 Quick-release
6 Feed inlet
7 Brush seating
8 Locking lever
5.8.1 Cleaning Dirt Hopper
Clean dirt hopper (Fig. 11/2) at daily intervals
or as required.
Remove dirt hopper from the right machine
side (seen in direction of travel).
Use quick-release (Fig. 11/5) to loosen
feed inlet (Fig. 11/6) and clean dirt hopper.
5.8.2 Removing Brushes
1. Raise the cylindrical brush deck (Fig. 11/
3) using pedal (Fig. 11/1).
2. Release brush seating (Fig. 11/7) by lock-
ing lever (Fig. 11/8).
3. Remove brush seating by lowering and
removing it to the front.
4. Remove and check the brushes.
5.8.3 Cleaning Brushes
Clean brushes in the brush deck at daily
intervals or as required.
5.8.4 Installing Brushes
Check brushes in the brush deck for wearing
at weekly intervals and replace as required.
1. Insert brush into brush head and let it catch
(Side A has to point to the outside).
2. Place brush seating and lock by lever.
5.8.5 Changing Roller Bumper
Check roller bumpers (Fig. 11/4) at weekly
intervals and replace if required.
2 3 1 4 7 5 6 8
A
Fig.11