Minuteman E24 (7061.31) Walk-Behind Scrubber User Manual

Page 8

Advertising
background image

8

Adapt driving habits to local conditions.

• The machine may be used only for opera-

tion on flat floors with a maximum inclina-
tion of up to 2 %.

1.4

Maintenance instructions

• The daily and weekly maintenance and

repair task must be performed by a quali-
fied operator. For further maintenance and
repair work, please contact your local Min-
uteman service center.

• Observe the maintenance activities and

intervals set out in the instruction manual.

• Maintenance and repair work may be car-

ried out only by means of appropriate
tools.

• Have the machine checked for safe con-

dition in the sense of the Accident Pre-
vention Regulation by an expert at regu-
lar intervals (recommendation: at least
once yearly) as well as after modifications
or repair.

• Spare parts have to equal the technical

requirements as specified by the manu-
facturer! Genuine spare parts guarantee
compliance with these requirements.

• Turn off and remove the key before in-

specting the machine or performing any
maintenance work.

• To prevent the machine from being used

by unauthorized persons, the control key
must be removed.

• When performing work on the electrical

system, be sure to disconnect the battery
plug.

• Make sure to protect the recovery tank

against accidental closing or tilting down
before working in the area of a lifted tank
lid.

• Do not clean the electrical parts by means

of high-pressure cleaning equipment.

• The use of aggressive detergents is pro-

hibited.

• Let the machine dry after cleaning
• The machine may be taken into operation

after all protective devices have been fit-
ted and positioned.

1.5

Specific Hazards

Electric system
•
Only use genuine fuses with specified rat-

ings.

• In case of malfunction of the electric sys-

tem, shut the machine down immediately
and have it serviced.

• Only qualified personnel are authorized to

work on the electrical equipment and only
according to electro-technical rules.

• Inspect/check the electrical equipment of

the machine at regular intervals. fix any
defects immediately, such as loose con-
nections or damaged cables..

Battery
•
Observe the operating instructions of the

battery manufacturer.

• Never place metal objects or tools on bat-

teries - short-circuit hazard!

• Due to alteration of the center of gravity,

Use batteries as released and at the pre-
scribed position only.

• Charge batteries only in areas with suffi-

cient ventilation – Explosion hazard!

Safety Information

Advertising