Minuteman KS 28 G (6403.xx) - Manual (Page 14)

14
Starting Up
2 Starting Up
2.1 Before starting up for the first
time
2.1.1 Unpacking
Remove the packaging, open the fas-
tening straps and take the Minuteman
KS
28 from the pallet. For reasons of
packaging, the handlebar of the Minute-
man KS
28 is pivoted forwards. First of
all, pivot the handlebar to its operating
position.
Pivoting the handlebar to its operat-
ing position
1. Loosen the wing bolts (Fig.
4/1) on
the right and left sides of the handle-
bar (Fig.
4/2) a few revolutions until
the handlebar (Fig. 4/2) can be
straightened up.
2. Pivot the handlebar (Fig. 4/2) to-
wards the rear and set it to a height
convenient for the user.
3. Tighten the wing bolts (Fig. 4/1) on
the right and left sides of the handle-
bar (Fig.
4/2).
Fig. 4
1
2