Minuteman KS 28 G (6403.xx) - Manual (Page 51)

51
Maintenance and Service
Changing the side aprons
2. Unscrew the screw connections
(Fig. 22/2) in the side aprons
(Fig. 22/1+5).
3. Change the sealing strips and adjust
the side aprons (Fig. 22/1+5): There
must be approx. 0.04 - 0.08 in clear-
ance to the floor.
4. Screw the screw connections
(Fig. 22/2) back in the side aprons
(Fig. 22/1+5). Also screw the ground
of the wing nut at Position A
(Fig.
22/A).
Changing the rear aprons
5. Remove the dirt hopper,
refer to Section 5.9.1.
6. Unscrew the screw connections
(Fig. 22/4) in the rear aprons
(Fig. 23/1+2).
7. Change the sealing strip and adjust
the rear apron (Fig. 22/3): The clear-
ance of the rear apron (Fig. 23/2)
from the ground must be 0.04 -
0.08 in.
8. Screw the screw connections
(Fig. 22/4) back in the rear aprons
(Fig. 23/1+2).
Fig. 23
1 Front rear apron
2 Back rear apron
1
2