Multichannel Systems STG3008-FA Manual - Manual (Page 7)

1
1 Introduction
1.1 About this Manual
This manual comprises all important information about the installation and operation of the
stimulus generator STG3000 series and MC_Stimulus II software. It is assumed that you have
already a basic understanding of technical and software terms. No special skills are required
to read this manual.
This documentation refers only to the STG hardware and MC_Stimulus II software. For more
information on the STG's DLL functions and programming of custom programs, please read the
separate documentation in the documentation folder in the MC_Stimulus II program directory.
If you are using the STG for the first time, please read the important safety advice before
installing the hardware and software (see Important Safety Advice, where you will find
important information about the installation and first steps).
The printed manual and help are basically the same, so it is up to you which one you will use.
The help offers you the advantage of scrolling through the text in a non-linear fashion, picking
up all information you need, especially if you use the index and the search function. If you are
going to read larger text passages, however, you may prefer the printed manual.
The device and the software are part of an ongoing developmental process. Please understand
that the provided documentation is not always up to date. Check also the MCS web site
(www.multichannelsystems.com) from time to time for downloading up-to-date manuals
and new software versions.