Multichannel Systems STG3008-FA Manual - Manual (Page 71)

Analog Output Signals
65
Example 1a: Voltage Mode: The green trace shows the voltage (+U) output; and the pink trace
shows the TTL output from the Sync Out that was used for triggering the oscilloscope

Rise time with programmed 500 mV and 50 μA pulses, 10 k
 load resistance.
Rise time (10 % / 90 %) = 3 μs

Example 1b: Current Mode: The green trace shows the current output (+I) with a load resistance
of 10 k
 and the pink trace shows the TTL output from the Sync Out that was used for
triggering the oscilloscope
