Multichannel Systems STG3008-FA Manual - Manual (Page 86)

STG3008-FA Manual
80
12.3 Error Messages
This chapter explains error messages to you that may occur during normal operation. They do not
present a reason to worry and can be easily avoided.
Download
These error messages may occur during download on the STG. Please note that you can switch
off some of these messages if they disturb your experiment. See chapter "Downloading Stimuli"
for more details on downloading.
The worksheet is empty. No data is present that
can be downloaded.
There is no stimulus generator connected to
the computer or the STG may be switched off.
Please check the computer connection and the
status lamp of the STG.
There is no valid connection to an STG.
Download of data is not possible. Please check
the computer connection and the status lamp
of the STG.
The last voltage / current values of the named
channels are not zero. The current / voltage
levels are set to zero after the last value. The last
used values of these channels are kept until the
STG is stopped.