Diamond Products Fast-Cut SLR User Manual
Page 4
4
Delivery inventory
1. Fast-cut
2. Adapter ring 0.8"/1.0" (not in the general scope of delivery. Country‑specific)
3. Screwdriver (for carburetor adjustment)
4. Offset screwdriver
5. Universal wrench 13/19
7. Instruction manual (not shown)
Symbols
You will notice the following symbols on the Fast‑Cut and in the Instruction Manual:
In case one of the parts listed should not be included in the
delivery inventory, please consult your sales agent.
Never use carbide tipped, circular saw
blades or any kind of wood cutting
blades!
combination Start/Stop (I/O) switch,
choke
Starting procedure
(Press decompression valve,
Engine - manual start)
Stop engine!
Warning!
Kickback!
Fuel and oil mixture
First aid
Recycling
Do not touch hot surfaces!
Read instruction manual and
follow the warning- and safety
precautions!
Particular care and caution!
Forbidden!
Wear helmet and eye, respiratory
and hearing protection!
Wear protective gloves!
Wear respiratory protection!
Hazardous dust and/or
gas emission!
Fire hazard from flying sparks!
No smoking!
No open fire!
Direction of cutting wheel rotation
Warning: the max. peripheral
speed of the cutting disc is 80 m/s!
cutting disc dimensions
5
4
3
2
1