PASCO UI-5000 850 Universal Interface Instruction Manual - Manual (Page 7)

® ®
UI-5000 850 Universal Interface
012-12355A 7
Please note that the 8-Pin DIN Cable Assembly that is included with several ScienceWorkshop
sensors such as the CI-6504A Light Sensor can also be used as an extension cable.
DO NOT connect more than one extender cable between a sensor and the 850 Universal
Interface. Connect the sensor directly to the interface or, at most, through one extender cable to
the interface.
Using the Interface with PASCO Capstone Software
1. Connect a PASPORT or ScienceWorkshop sensor to an input port on the interface.
2. Start PASCO Capstone.
• The main element is the Workbook page.
• Above the Workbook page are the Menu bar and Tool bar.
• To the left, right, and below the Workbook page are the Tools palette, the Displays palette,
and the Controls palette.
• Hover the cursor over an icon, button, or other element to see a descriptive Tool Tip.
Add Workbook page
Tools
palette
Controls
palette
Displays
palette
Tool bar
Menu bar
Display templates
Tool Tip