PASCO PS-2120A Rotary Motion Sensor - Manual (Page 3)

®
P S - 2 1 2 0 A C o n t e n t s
3 E x p e r i m e n t G u i d e
SPARK SLS Setup
• In the Home Screen, press “Angular Velocity” and then
press the Show button (
) to open a graph dis-
play.
• Press the Start button ( ) to begin recording data.
Turn the shaft of the sensor and view the data in the dis-
play.
• Press the Stop ( ) button to end data recording.
• SETUP: For detailed information on setting up the
data acquisition software and recording data, refer
to the User’s Guide and the online help for the data
acquisition software.
Technical Support
For assistance, contact PASCO:
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone: +1 916-786-3800 (worldwide)
800-772-8700 (U.S.)
Web: www.pasco.com
Email: [email protected]
SPARK SLS Home Screen for
the Rotary Motion Sensor
Press
Show
Press “Angular
Velocity”
Press “Angular Velocity” and
then press “Show”
Press “Start”
Press
Start
Turn the Rotary Motion
Sensor shaft